Description Product Overview Alka 100 is a multi-purpose, two-component epoxy system formulated for use as a primer, clear coat, or binder within epoxy flooring systems. Designed for trade applications, it delivers strong penetration and adhesion across a wide range of substrates, making it suitable for both new installations and refurbishment work. Its low viscosity allows for effective substrate wetting, ensuring consistent bonding performance across porous and non-porous surfaces. With a 100% solids composition, this system provides high durability and resistance to mechanical and chemical stress, making it suitable for commercial and industrial environments. It can be used as a standalone sealer or integrated into full epoxy systems including slurry, broadcast, and mortar applications. Alka 100 is also suitable for use on both dry and damp substrates, providing flexibility on site where moisture conditions may vary. Key Features Two-component, high solids epoxy system for trade use Excellent penetration and adhesion to concrete, timber, and cement-based substrates Low viscosity for improved substrate wetting and coverage Suitable for dry and damp surfaces Can be used as primer, sealer, clear coat, or epoxy binder Strong mechanical and chemical resistance 100% solids formulation for durability and performance Fast recoat times to support efficient installation schedules Applications Priming and sealing concrete and cement-based substrates Bonding agent for epoxy screeds and self-levelling systems Binder for epoxy mortar and broadcast flooring systems Clear coating for internal decorative epoxy finishes Sealing and protecting warehouse, garage, and commercial floors Subfloor preparation prior to levelling compounds Notes Ensure substrate is clean, dry, and free from contaminants such as oil, grease, and laitance Mix both components thoroughly using a mechanical mixer before application Apply by brush or roller at approximately 50 microns per coat Typical consumption is 0.2–0.3 kg/m² depending on substrate porosity Recoat window is approximately 12 hours, with full cure achieved in 7 days Highly porous substrates may require multiple coats for adequate sealing Additional Information This product is commonly used across epoxy flooring systems where reliable bonding and surface preparation are critical. It is supplied as a 30kg kit (resin and hardener) and provides a clear, transparent finish suitable for both functional and decorative applications. The system supports light foot traffic within approximately 3 days and delivers long-term performance under heavy load conditions when fully cured.
